All Armor ✦ Organic Heads ✦ Helmets ✦ Chest ✦ Shoulder ✦ Wrist ✦ Legs ✦ Shoes ✦ Crotch/Butts/Belts ✦ Neck Adapters ✦ Robots

Space Wars

Quick View

MG Annihilator Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

NVG Stacked Doppelganger Helm

from $2.00

Product is 1/12 Scale - designed to work with 6” action figures

Figures is for scale reference and is NOT included
NVGS Sold here
Resin color may vary
Includes: Selected Items

Quick View

MG Stacked Doppelganger Helmet

from $2.00

Product is 1/12 Scale - designed to work with 6” action figures

Figures is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

MG Frontier Spectre

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

RESPIRATORS SOLD SEPARATELY: Respirator A Respirator B

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

MG Doppelgänger Phase 1 Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.
Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

Master Grade Spectre Pilot Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

Master Grade Spectre Tactical Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

Stalker Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes mostly hollowed out and will require some customization to fit it to your designated figure.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1 helmet
Helmet design based off of Marcus Napuri’s Stalker helmet concept.

Quick View

Master Grade Spectre Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

MG Stactical Trooper Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

MG Stactical Scout Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Compatible helm attachments: Quad NVGs or Thermal Imagers
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

MG Vandal Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

MG Doppelgänger Scout Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.
Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

MG Destroyer Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

MG Frontier Phase 2 Captain Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

MG Frontier Phase 2 Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

MG Frontier Doppel Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

Razorback Hazard MG Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.
- The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.Product is 1/12 Scale - designed to work with 6” action figures
Figures is for scale reference and is NOT included
Resin color may vary
Includes: selected items
Optics are sold separately

Quick View

Vorak Scout Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Halo Inspired

Quick View

NUCS Marine Helmet

$12.00

ATTN: There is no ball joint system included in this head - grab an adapter here

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1 helmet and visor

Quick View

Skybreaker Obsidian Helmet

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height. Product is 1/12 Scale - designed to work with 6” action figures

Figures is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

Skybreaker Vanguard Helmet

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.Product is 1/12 Scale - designed to work with 6” action figures

Figures is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

Skybreaker Ashfall Helmet

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Compatible helm attachments: Quad NVGs or Thermal Imagers
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

Skybreaker Warfang Helmet

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.Product is 1/12 Scale - designed to work with 6” action figures

Figures is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

MG Old School Skybreaker Helm

from $2.00

Product is 1/12 Scale - designed to work with 6” action figures

Figures is for scale reference and is NOT included
Resin color may vary
Includes: Selected Items

Quick View

Ajax Helm (Copy)

from $14.00

Product is 1/12 scale
Recommended use for the insert: use with smaller bodies like Damtoys, for larger bodies like Notaman just glue the head adapter directly to the helm!
Resin color may vary
Includes: Helm and Visor

Quick View

MG Stactical Bear Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Jumper

Quick View

MG Annihilator Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

Ajax Helm (Copy)

from $14.00

Product is 1/12 scale
Recommended use for the insert: use with smaller bodies like Damtoys, for larger bodies like Notaman just glue the head adapter directly to the helm!
Resin color may vary
Includes: Helm and Visor

Quick View

MG Frontier Expeditionary Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

MG Marauder Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

Jumper Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.
Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

Interceptor Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height. Product is 1/12 Scale - designed to work with 6” action figures

Figures is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

MG Hellcat Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.Product is 1/12 Scale - designed to work with 6” action figures

Figures is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Bug Hunters

Quick View

Stactical Ascender Helm

from $2.00

Product is 1/12 scale
Resin color may vary
Includes: Helm and Visor

Quick View

MG Honors Edge Helmet

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

MG Honors Edge Primus Helmet

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

Heaven Ascenders Basic Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

Heaven Ascenders Scout Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

Heaven Ascenders T Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Cyberpunk

Quick View

Oracle Helmet

$12.00

ATTN: There is no ball joint system included in this head - grab an adapter here

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1 helmet

Quick View

S.C.A.B. Helm Charlie

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height. Product is 1/12 Scale - designed to work with 6” action figures

Figures is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

S.C.A.B. Helm Alpha

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height. Product is 1/12 Scale - designed to work with 6” action figures

Figures is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

S.C.A.B. Helm Bravo

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height. Product is 1/12 Scale - designed to work with 6” action figures

Figures is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

Zephyr Steele Headsculpt

$12.00

ATTN: There is no ball joint system included in this head - it comes mostly hollowed out and will require some customization to fit it to your designated figure.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1 head

Quick View

Sam Marek Headsculpt

$12.00

ATTN: There is no ball joint system included in this head - it comes mostly hollowed out and will require some customization to fit it to your designated figure.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1 head

Quick View

Cyber Merc Head

$12.00

ATTN: There is no ball joint system included in this head - it comes mostly hollowed out and will require some customization to fit it to your designated figure.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1 head

Quick View

Meniied Dim Walker Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

Ailus Dim Walker Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

Almorian Jackal Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

✧ Enthralled Reaver ✧

$12.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1x Head

Quick View

✧ Orion's Return ✧

$12.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1x Head

Quick View

Almorian TGV Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

V.A.L.K. Pilot Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: selected items

Quick View

Precursor Guardian Head

$12.00

ATTN: There is no ball joint system included in this head - it comes mostly hollowed out and will require some customization to fit it to your designated figure.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1 head

Hats

Quick View

Lost Ronin Hat

$12.00

Product is 1/12 Scale - designed to work with 6” action figures

Figures is for scale reference and is NOT included
Resin color may vary
Includes: 1 Hat

Quick View

Skrau Straw Hat

$12.00

Product is 1/12 scale - designed to work with 6” action figures
Figure/helmet is for scale reference and is NOT included
Resin color may vary
Includes: 1 hat

Retro Space

Quick View

Drift Pilot Helm

$12.00

ATTN: There is no ball joint system included in this head - grab an adapter here

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1 helmet

Quick View

Radio Renegade Helm

$12.00

ATTN: There is no ball joint system included in this head - grab an adapter here

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1 helmet

Quick View

Sforza Explorer Helm

$12.00

ATTN: There is no ball joint system included in this head - grab an adapter here

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1 helmet

Quick View

Storm Runner Helm

$12.00

ATTN: There is no ball joint system included in this head - grab an adapter here

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1 helmet

Quick View

Star Ryder Helm

$12.00

ATTN: There is no ball joint system included in this head - grab an adapter here

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1 helmet

Quick View

Dustbelt Pilot

$12.00

ATTN: There is no ball joint system included in this head - grab an adapter here

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1 helmet

Quick View

Dawnfield Helm

$12.00

ATTN: There is no ball joint system included in this head - grab an adapter here

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1 helmet

Quick View

Orbital Blacksite Helm

$14.00

ATTN: There is no ball joint system included in this head - grab an adapter here

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1 helmet and visor

Quick View

Renegade Interceptor Helm

$12.00

ATTN: There is no ball joint system included in this head - grab an adapter here

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1 helmet

Quick View

MG Starside Operator Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes mostly hollowed out and will require some customization to fit it to your designated figure.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1 head

Please note: Stock visor is opaque, translucent visors are available but come un polished. To maximize their clearness, you’ll need to sand the visor and apply clear coats

Quick View

MG Starside Basic Helm

from $2.00

ATTN: There is no ball joint system included in this head - it comes mostly hollowed out and will require some customization to fit it to your designated figure.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1 head

Please note: Stock visor is opaque, translucent visors are available but come un polished. To maximize their clearness, you’ll need to sand the visor and apply clear coats

Quick View

MG Starside Low Altitude Pilot Mask

$14.00

ATTN: There is no ball joint system included in this head - it comes mostly hollowed out and will require some customization to fit it to your designated figure. We recommend using the Compact DT Insert with this helm.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1 head

Post Apocalyptic

Quick View

✧ The Hirsch ✧

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1x Head

Quick View

✧ Widder Shaman ✧

from $2.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

The helmet insert makes the space inside the helmet smaller for fitting on a ball joint. Helmet insert can be paired with our helmet adapters for a plug and play system. Please note that depending on your combination of body/helmet the adapter/insert may make the head sit too high or too low. If the head sits too low you can use our insert spacers to adjust the height.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1x Head

Fantasy

Quick View

Plague Doctor Head

from $10.00

Product is 1/12 Scale - designed to work with 6” action figures

Figures is for scale reference and is NOT included
Resin color may vary
Includes: Selected Items

Quick View

Artorias Helmet

$8.00

Product is 1/12 Scale - designed to work with 6” action figures

Figures is for scale reference and is NOT included
Resin color may vary
Includes: 1 helm

Quick View

Servitor of Darkness Helm

$12.00

Product is 1/12 Scale - designed to work with 6” action figures

Figures is for scale reference and is NOT included
Resin color may vary
Includes: 1 helm

Quick View

Hexed Crusader Helm

$12.00

Product is 1/12 Scale - designed to work with 6” action figures

Figures is for scale reference and is NOT included
Resin color may vary
Includes: 1 helm

Quick View

Helm of the Redeemer

$12.00

Product is 1/12 Scale - designed to work with 6” action figures

Figures is for scale reference and is NOT included
Resin color may vary
Includes: 1 helm

Quick View

Shrouded Prophets Veil

$12.00

Product is 1/12 Scale - designed to work with 6” action figures

Figures is for scale reference and is NOT included
Resin color may vary
Includes: 1 headsculpt

Quick View

"Jerry"

$10.00

ATTN: There is no ball joint system included in this head - it comes hollowed out and will require some customization to fit it to your designated figure.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1x Head

Quick View

Lost Ronin Half Mask

$12.00

Product is 1/12 Scale - designed to work with 6” action figures

Figures is for scale reference and is NOT included
Resin color may vary
Includes: 1 Headsculpt

Quick View

Lost Ronin Hornless Mask

$12.00

Product is 1/12 Scale - designed to work with 6” action figures

Figures is for scale reference and is NOT included
Resin color may vary
Includes: 1 Headsculpt

Quick View

Lost Ronin Horned Mask

$12.00

Product is 1/12 Scale - designed to work with 6” action figures

Figures is for scale reference and is NOT included
Resin color may vary
Includes: 1 Headsculpt

Beasts

Cyno Basic Head

$12.00

ATTN: There is no ball joint system included in this head - it comes mostly hollowed out and will require some customization to fit it to your designated figure.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1 head

Faeldrex Basic Head

$12.00

ATTN: There is no ball joint system included in this head - it comes mostly hollowed out and will require some customization to fit it to your designated figure.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1 head

Faeldrex with Quils

$12.00

ATTN: There is no ball joint system included in this head - it comes mostly hollowed out and will require some customization to fit it to your designated figure.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1 head

Xahlen Male

$12.00

ATTN: There is no ball joint system included in this head - it comes mostly hollowed out and will require some customization to fit it to your designated figure.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1 head

Faeldrex with Augmentations

$12.00

ATTN: There is no ball joint system included in this head - it comes mostly hollowed out and will require some customization to fit it to your designated figure.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1 head

Cyno Head with Augmentations

$12.00

ATTN: There is no ball joint system included in this head - it comes mostly hollowed out and will require some customization to fit it to your designated figure.

Product is 1/12 scale - designed to work with 6” action figures
Figure is for scale reference and is NOT included
Resin color may vary
Includes: 1 head

Gator Head

$12.00

ATTN: There is no ball joint system included in this head - it comes mostly hollowed out and will require some customization to fit it to your designated figure.